Buy PSP 608MD, get a free gift with purchase:
PSP 608 MD is perhaps the most fully featured delay plug-in available on the market.
PSP designed this plugin to offer you a creative tool that is not only functional, but also deeply inspiring.
Each tap has selectable feedback, stereo image and position, delay time, multimode filter, modulation, drive/tape saturation, and reverb. Moreover, the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options!
The modulation section offers both an LFO and envelope follower, and the tape saturation algorithm is taken from renowned mastering processors. And of course this can all be done at any bit depth and sample rate up to 24-bit/384 kHz, and be fully automated via MIDI and your host software!
Features:
- Up to 8 seconds of delay time per channel
- Continuous control over the delay time in milliseconds and/or chosen note quantization
- Three operation modes: MULTIDELAY, in which each tap has its own feedback buffer; MULTITAP, in which the Master Feedback operates on one (user selectable) tap; and MULTIFB, where turning off a tap leaves its feedback buffer signal active
- Each tap includes independent adjustment of gain, stereo field width and balance, delay time, filtering, modulation, saturation simulation, and reverberation
- Each tap can choose between multiple biquadratic filter types, including Low Pass, Band Pass, High Pass, Peak, and four Shelf filters
- Modulation section (LFO and envelope follower) offer adjustable modulation depth of ±3 octaves, and can also be used to control filter cutoff
- Tape saturation simulation with adjustable gain, based on the algorithm used in our mastering processors
- Filtering module in feedback includes LP/BP/HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
- Vintage reverberation module for faithful simulation of spring and plate reverbs
- Support for sample rates up to 384 kHz
- Host automation of all processing parameters
System Requirements
PC:
VST3
- Windows 7 – Windows 11
- 64-bit VST3 compatible application
VST
- Windows 7 – Windows 11
- 64-bit VST compatible application
AAX
- Windows 7 – Windows 11
- Pro Tools
All DAWs
- The latest iLok License Manager application installed
macOS Intel or macOS Silicon
AudioUnit
- macOS 10.12 – macOS 13 Ventura
- 64-bit AudioUnit compatible host application
VST
- macOS 10.12 – macOS 13 Ventura
- 64-bit VST compatible host application
VST3
- macOS 10.12 – macOS 13 Ventura
- 64-bit VST3 compatible host application
AAX
- macOS 10.12 – macOS 13 Ventura
- Pro Tools
All DAWs
- Up to date iLok License Manager application installed
After only five years in business, the three-member team at PSPaudioware of Jozefoslaw, Poland (near Warsaw), have released a total of 19 software plug-ins. The line's universal appeal stems from the products' dependable, good sound and clever, intuitive GUIs. The software supports 44.1 to 192 kH...
Read MorePlease Note: PSP VintageWarmer2 is used as an example.
Activation
1. Visit the PSP Registration Centre and create/log into your PSPaudioware account.
2. Select the Manual Product Activation link and copy and paste/manually enter the serial number that is provided with your User Account. > click 'Activate!.'
3. Your PSP product will now show up in your PSP customer account. Your 30-digit iLok activation code will also be listed under authorization (PACE). Download the relevant installer.
iLok Registration
1. Go to the iLok website and create a new account if you are not currently registered and do not have the iLok Licence Manager installed on your computer.
2. Download and install the iLok License Manager.
3. Open your iLok license manager application > click 'Sign In'.
4. Enter your iLok registered User ID and password > click ‘Sign In'.
5. Once you are signed in, click the ‘Redeem’ icon which is located at the top-right corner of the iLok Licence Manager’s interface.
6. Copy and paste/manually enter the 30-digit code from your PSP Audioware account into the available Activation Code boxes, and then click ‘Next'.
7. Select your activation destination > Click 'Activate'.
8. Click 'Ok'.
Installation
Mac
1. Open the recently downloaded .dmg file to begin the installation.
2. Click 'Continue'.
3. Click 'Continue'.
4. Click 'Continue'.
5. Click 'Agree'.
6. Click 'Continue'.
7. Click 'Install'.
8. Click 'Close'.
9. Open your DAW > Open your newly installed software.
Your software is now activated and ready to use.
PC
1. Open the recently downloaded .exe file to begin the installation.
2. Click 'Next >'.
3. Select 'I Accept the Agreement' > Click 'Next'.
4. Click 'Next >'.
5. Click 'Next'.
6. Click 'Next'.
7. Click 'Next' to begin the installation.
8. Click 'Finish'.
9. Open your DAW > Open your newly installed software.
Your software is now activated and ready to use.
