Antelope Audio BAE Bundle

BAE-1073

The BAE-1073 is based on a legendary three-band hardware EQ that has become a studio staple for its rich and warm sound. It features a high-pass filter before the EQ, making the unit even more versatile and precise, in other words, a must-have for any tracking or mixing session.

The BAE-1073 is famous for its warm, musical sound. It’s often used on vocals and drums, but it does its magic on any source signal. It’s a very versatile EQ, and that’s exactly why it’s so popular. It includes three different EQ modes: high pass, low pass, and band pass. Each mode has its unique sound. The high pass mode is great for removing unwanted frequencies, rumble, or spill. The low pass mode is perfect for adding weight to a track or taming harsh frequencies. The band pass mode is somewhere in between, and it’s great for shaping the overall sound of a track.
 
Antelope Audio's BAE-1073 reigns superior when it comes to modeling the original EQ. Meticulously measuring and closely studying the unit’s behavior allowed us to get as close as possible to the original sound of the BAE. The result is an EQ that is capable of adding the grit and character of the original without overtly coloring the sound. The BAE-1073 is perfect for those after the classic British EQ sound without sacrificing any sonic clarity.

Features

• Adds true 1970s analog mojo to your production
• Features a 3-band EQ pre-set to high pass, band pass, and low pass
• The EQ for drums and vocals but feed it whatever and it’ll provide
• HPF before the bands for additional control

Learn more about BAE-1073

BAE-10DCF

BAE-10DCF is an official model of a multi-purpose 1980s compressor classic, allowing for clean and transparent compression but also colorful and vintage dynamic processing or straight-up limiting. Great for drums but also perfect for vocals and guitars.  

BAE-10DCF allows you to keep compression transparent and smooth or completely transform the input signal into the signature vivid sound of the compressor. A Gain Make-up knob allows you to additionally control the signal volume. BAE 10DCF is a multi-purpose unit that can be used both during tracking and in post-production. As you can guess, it does an absolutely great job on an array of instruments like drums and percussion and is suitable for recordists, producers, and mastering engineers but podcasters and vloggers who need their voices polished and neatly produced as well.
 
The 10DCF features a fully independent Compressor and a separate Limiter providing maximum flexibility and dynamic control over any source and any type of material. With dedicated knobs for Threshold, Ratio, Bypass Filter, Attack, and Recovery for both modules users can achieve enough depth when sculpting the perfect sound. Dynamic processors that offer such a variety of controls are often clean and colorless. In contrast, the 10DCF offers that same versatility and control, but also character and color.

Features

• Smooth and transparent compression or full-on vintage sound
• Gain Make-Up knob for additional volume control
• Versatile unit, suitable for tracking, mixing, and mastering
• The compressor you need to make vocals and rock guitars truly stand out
• Bypass Filter for additional tone-shaping
• Recovery switches to tailor the response of the BAE-10DCF

Learn more about BAE-10DCF

BAE-1073MP

Modeled after the gold-standard British analog preamp, known for its warmth and musicality, BAE 1073MP is a versatile unit that needs no further introduction. Its simple but effective controls ensure it is borderline impossible to make it sound bad. 

BAE 1073MP models the iconic 1073 mic preamp and thus it carries over its signature solid low-end, clean mids, and rich highs. The 1073MP features selectable impedance at 300 or 1200 ohms making it well-suited for a variety of microphone models. Its input gain and output level adjustment knobs allow the signal to be easily kept at the desired level when tracking line input signal as well. The iconic BAE 1073MP color has been carefully preserved and this unit comes in handy not only when treating individual sources but with bus groups or whole mixes as well.

Features

• Adds true 1970s analog mojo to your production
• Features a 3-band EQ pre-set to high pass, band pass, and low pass
• The EQ for drums and vocals but feed it whatever and it’ll provide
• HPF before the bands for additional control

Learn more about BAE-1073MP

BAE-1084

BAE-1084 is one of the most versatile EQ channel strips. Known for its massive lows and smooth high-end, it will squeeze the best out of your bass drums, guitars, or synth bass lines.

Inspired by a highly-desired vintage console channel strip EQ, the BAE-1084 is one of the most precise and versatile EQs you can ever get your hands on. The EQ is a synonym for large fat sound with massive lows and smooth highs. It offers extended control over the frequency range, faithfully recreated here.
 
BAE-1084 brings tone shaping to a whole new level and what you’ve so far considered tiny tweaks now result in unprecedented all-analog sonic detail. Just try boosting at 220Hz – it won’t result in any mud in your sound. The BAE-1084 also offers a Hi-Q button for a narrowing of the mid-band.

Features

• Versatile and surgically precise parametric EQ
• HPF at 45Hz, 70Hz, 160Hz and 360Hz
• LPF at 6kHz, 8kHz, 10kHz, 14kHz and 18kHz
• Mid band at 350Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz and 7.2kHz
• High band works in shelving mode at 10kHz, 12kHz, and 16kHz
• Hi-Q button for narrowing the mid-band

Learn more about BAE-1084