bx_limiter

The Perfect Limiter For Stems And Submixes

To get your mixes to come out of the computer “loud & proud” but punchy and without unwanted distortion, it is necessary to cut off peaks and transients on all channels and stems (i.e., grouped or summed audio channels).

Any pro will tell you: ”Don´t just limit on the master buss!”

Brainworx designed bx_limiter to be used on multiple busses to smoothen things out and glue them together prior to running through a full blown mastering limiter, like the Brainworx bx_XL V2 or bx_masterdesk. These plugins work best - and most importantly sound best - when they don't have TOO MUCH limiting to do.

bx_limiter offers a great sounding limiter algorithm, then adds some great sounding saturation (to further glue signals in your mixes), and some useful features not found in your average limiter plugin.

The “Channel Link” knob, for example, is a unique and powerful feature that allows you to blend between “Linked” mode where both channels are limited when the threshold is exceeded on either channel, and “Off” where only the channel on which the threshold was exceeded is limited.

If, for example, you set the blend control at 50% and a signal exceeds the threshold only on the right channel, the gain on the left channel will be reduced by half as much as the right. This creates some powerful options to maximize loudness while maintaining an even sounding mix.

Here are some recommended uses of the bx_limiter:

Traditional Defeating Of Peaks

Simply lower the Threshold to stop peaks at a defined level.

Maximizing the Output Level

Just boost Gain until the output level hits 0dB.

Loudness Maximizing

Add that extra dB of perceived loudness using the XL saturation.

Manage Stereo Material

Got cymbal crashes in one channel that are too hot? Dial the Channel Link knob all the way to “Off” to allow the limiter to grab just the peak on that channel and then dial it back towards “Link” until you achieve the desired balance between limiting the cymbal crash and relative channel levels

Sound Shaping / Extreme Effects

Drive signals or stems (i.e., grouped audio signals) into the limiter and saturate heavily without affecting your stem levels.

Parallel Dynamics & Saturation

Overdo the settings of the limiter and saturation effect and blend the original signal with the effected sound to create vintage drum & vocal sounds or special effects.

Features

• CPU-friendly, highly accurate limiter for Mono, Stereo & Multi-Channel signals
• Low Latency (2ms or less depending on sample rate & system)
• Mix control (Dry/Wet) lets you blend processed & unprocessed audio
• Channel Link knob lets you seamlessly blend between unlinked and linked peak detection
• Output Dim adjusts your output level conveniently in any mix session
• 1-Click Fader Link to drive signals into limiter while compensating for level
• XL = Saturation on board! Add that extra dB of perceived loudness
• Adjustable Release Times
• Stereo, mono and multi-channel operation (5.1 / 7.1 and more)

System Requirements

• AAX, AU, VST3
• macOS 15 down to macOS 12
• Windows 11 down to Windows 10