- hot!
- top rated
AVA Mastering EQ
What is the AVA Mastering EQ?
The AVA Mastering EQ is explicitly designed for the task of mastering your mixes. When 2 adjacent bands of the AVA-MtE are adjusted, the resultant curve is “flat” across the band edges, rather than discrete humps and valleys. The resulting curves are perfectly suited for the broad, musical changes needed for final tone-control while retaining the harmonic balance between the elements of your mix. Managing a powerful full-range EQ has never been so fast and easy. The results are quintessentially “Harrison”: effortless, smooth and transparent.
Controls
The AVA-ME has 31 control bands ranging from 20hz to 20kHz and increasing by ⅓ octave increments. By default, the scale shows +/-4dB, but if you increase a band beyond 4dB, the scale will increase to show the changes up to +/-14 dB.
Effortless Mouse Control
The AVA-ME is most easily controlled by clicking and dragging the mouse across the frequency spectrum. You can also point your mouse at a control band or the output trim and increase the gain by dragging up/down or by using the scroll function on your mouse or touchpad. You can right-click and drag to reset bands to zero and hold shift while dragging the mouse to smooth any unwanted bumps between adjacent curves. (These options are indicated in the bottom-right corner of the plugin window). All controls have a “fine” mode which can be accessed by holding Control or Command while adjusting the control.
Zoom: Auto or Manual
By default, AVA-ME shows a +/-4dB scale. If you increase a band beyond this value, the scaling will automatically increase to accommodate your moves.
You can also click and drag the left or right dB scale to manually adjust the displayed scale.
If you manually set the scale, then a “lock” icon will appear at the lower-left corner of the EQ display. Click the “lock” icon to disengage the manual lock, and allow the AVA-ME to automatically set the scaling for you.
Output Trim - The “Trim” control adjusts the output level. Double-click the control to reset it to 0dB.
Filters
The AVA-ME has high-pass and low-pass filters with a gentle slope. The slope is selectable between 6dB/Oct and 12dB/Oct, and the frequency can be adjusted using the sliders above and below the curve.
Additional Features
- The “Ear” icon engages the momentary-bypass function, which allows you to audition the un-affected signal while you hold the mouse button; then restores the settings when you release the button.
- The “Gear” icon launches a menu with additional features including resizing, theme selection, and plugin version number.
- The alternative “Vintage” theme uses the colour scheme of Harrison’s large-format console software.
System Requirements
- MacOS: 10.9 or newer required
- Windows: Win7 or newer required
- Linux: Please try the demo
Host DAW support:
- ProTools: 10.3.5 or newer required for Windows, 11 or higher required for Mac. Enable the AAX format during installation
- Logic: Enable the AU format during installation
- Cubase: Enable the VST and/or VST3 format during installation
- Most other workstations: Enable the VST format during installation
Any references to any brands on this site/page, including reference to brands and instruments, are provided for description purposes only. For example references to instrument brands are provided to describe the sound of the instrument and/or the instrument used in the sample. Plugin Boutique do not have (nor do they claim) any association with or endorsement by these brands. Any goodwill attached to those brands rest with the brand owner. Plugin Boutique or its Suppliers do not accept any liability in relation to the content of the product or the accuracy of the description. "RHODES" is a registered trademark of Joseph A Brandstetter.