/ Kontakt Instrument / Jewel Empire II
Soundiron

Jewel Empire II

5.0 (1 Reviews)
$29.00
Jewel Empire II
Jewel Empire II
Walkthrough: Jewel Empire II gallery thumbnail
Composing With Jewel Empire II gallery thumbnail
Jewel Empire II - UI - Main
Jewel Empire II - UI - Adv
Jewel Empire II - UI - FX
Buy Now
Product information

Soundiron's Jewel Empire II captures the versatility and specific character of the GEM Imperial II electronic organ. The GEM series of instruments were manufactured by GeneralMusic in Italy sometime during the late 80s and early 90s. The GEM Imperial II is a large electronic organ with two keybeds and a large variety of voice tabs, a dedicated Bass voice section, and drawbars to control a lot of voice functions. Our Jewel Empire II features a large selection of sustains and staccatos – both normal and bass – to capture the varied character of this Italian instrument. Soundiron recorded the instrument articulations in wide stereo and a direct line in. After that, Soundiron crafted twenty evolving atmospheric pads from the source content to enhance the versatility. The Jewel Empire II has versatility and character that makes it a good addition to any composer’s sonic palette.

Soundiron have packed the GUI with lots of great sound-shaping controls that give you the flexibility to warp the sound in many ways. You have control over Volume, Attack, Release, Transient Offset, Vibrato and Octave layering. The "Glide" control slider allows you to play legato and portamento leads. You’ll also find an adaptable LFO system, with selectable LFO shape, modulation target parameter, speed, intensity, tempo-syncing and fade-in time. You can also apply your choice of 13 lowpass, high-pass and FX filter, with assignable modulation control options, including velocity, modwheel, expression, after-touch, key position and step-sequencer table control. You can also use our customizable arpeggiator, with a built-in velocity sequencer table and control over arp direction, note timing, swing, randomization and duration.

Artist - John Valasis

Jewel Empire II was recorded by John Valasis. John is a Greek-born composer, producer and sound designer. From his Athens based studio, he delivers scoring, foley and sound design services for many local and international clients. John's clientele includes prestigious brands like Native Instruments, Ableton, Soundiron, Virgin, Amazon Prime Video, Vice Magazine and BBC. John is also part of the roster of Ninja Tune's imprint Just Isn't Music, alongside artists like Amon Tobin, Bonobo, Flying Lotus and The Cinematic Orchestra.

John's professional experience began in the 90s as a composer and producer for popular music and gradually expanded his skill-set across a large variety of genres. With the abilities he acquired through his 20-year professional career, as well as his genuine love for soulful music, he has crafted a strong, personal and diverse musical identity. When not working on tight deadlines, John uses Poordream as a vehicle to freely express his emotions and influences, to explore sound and composition beyond the boundaries of conventional electronic music.

Contents

Jewel Empire II was recorded in a dry studio using a pair of Neumann TLM 103 large-diaphragm microphones and a direct line in. Soundiron recorded its stock presets with sustains and staccato samples, as well as its bass presets. The included octave, vibrato and FX rack give you an easy-to-use interface to completely customize and shape its fat analogue sound to fit a variety of creative styles.

The library comes equipped with flexible control features, like Swell, pitch Glide, Attack, Release, Vibrato, and Octave. There’s also a complete DSP effect rack, including convolution reverb with dozens of unique spaces, such as cathedrals, churches, halls, bunkers, garages, tunnels, chambers, rooms and plenty of otherworldly FX impulses to fully explore an endless variety of strange and unexpected sonic manipulations.

  • Advanced performance controls, vibrato, glide speed, LFO, Filter, Arp and full FX rack.
  • Sustains, staccatos, FX pads, and sound-designed samples.
  • Turn the Glide slider up for monophonic legato functionality, or turn it down to 0 for standard polyphonic mode.
  • The Octave knob gradually adds a lower and higher octave doubling effect for more body and power.
  • Convolution Reverb with 119 different cathedrals, churches, chambers, rooms, halls and special effect impulses.
  • A full multi-effects rack, with EQ, filter, phaser, flanger, delay, distortion, amp & speaker simulation and more.

Features

  • 3 main powerful open-format Kontakt .nki instruments
  • 20 Ambience patches created from the source content
  • Synth Sustains, Staccatos, and FX Pads
  • 20 Custom Sound-Designed FX and Ambient presets
  • 7.5 GB Installed
  • 6,973 Stereo Samples
  • 24 bit / 48kHz Stereo uncompressed PCM wav audio
  • Unlocked wav samples can be directly imported into almost any wav-compatible plugin or DAW.

System Requirements

  • Windows 7 or higher.
  • Mac OSX 10.9 or higher.
  • Dual-Core CPU, 2 GB System Ram, SATA or SSD hard drive recommended for this library.
  • Kontakt Full Version 5.5 or later

Important Notes:

  • The FULL Version of Kontakt 5.5.0+ is required in order to use this instrument.
  • You will be stuck in DEMO MODE if trying to use this instrument in the FREE Kontakt Player.

Installation Instructions

Note: Sonespheres 1 - Distance is used as the example.

Mac

Installation

1. Download the installer from within your Plugin Boutique User Account > double-click the .zip file to extract the contents.

2. Double-click the .dmg file to begin the installation.

3. Enter your serial number, found within your Plugin Boutique User Account > Click 'Verify'.

4. Click 'Okay'.

5. Read the Software Licensing Agreement > Click 'I Agree'.

6. Enter your name and email address > Click 'Confirm'.

7. Choose the download and install locations > Click 'Install'.

8. The installation is complete > Click 'Exit'.

9. Open Kontakt and click on the 'Files' tab.

10. Navigate to the location you chose to install your product in step 7 > Select the 'Instruments' folder.

11. Click and drag the .nki file into the main empty window in Kontakt.

Your software is now ready to use in standalone or in your DAW!

Windows

Installation

1. Download the installer from within your Plugin Boutique User Account > Double-click the .exe file to begin the installation.

2. Enter your serial number, found within your Plugin Boutique User Account > Click 'Verify'.

3. Click 'Okay'.

4. Read the Software Licensing Agreement > Click 'I Agree'.

5. Enter your name and email address > Click 'Confirm'.

6. Choose the download and install locations > Click 'Install'.

7. The installation is complete > Click 'Exit'.

8. Open Kontakt and click on the 'Files' tab.

9. Navigate to the location you chose to install your product in step 7 > Select the 'Instruments' folder.

10. Click and drag the .nki file into the main empty window in Kontakt.

Your software is now ready to use in standalone or in your DAW!

Plugin Boutique Rewards

Discover the most rewarding loyalty programme among all plugin retailers.

  • Free Loopmasters Samplepacks
  • Discounts on products and courses
  • Extra Virtual Cash claimed immediately at checkout
Find out more

Follow us:

X (Twitter) Facebook YouTube Instagram
Logo Logo

Plugin Boutique Limited, Part of the Beatport Group LLC.

Copyright © 2011-2025 Plugin Boutique. All rights reserved