Buy KorgTube, get a free gift with purchase:
Tube is an oscillator plugin for Korg’s multi engine. It couples a super-flexible noise generator with a feed-forward comb filter, a combination that we call “resonator modeling synthesis”. By modulating the noise density, the noise generator can create a very wide variety of signals such as bursts, gusts of air or sand, scratching, particles dropping onto a surface – and beyond. When these special signals are used to “excite” the resonator, Tube produces incredibly lively, nature-like tones: from woodwinds, plucked and bowed strings, to much more experimental, randomly evolving ones. Tube also features its own low-frequency oscillator, an envelope generator, and allows its noise signal to be used dry for even more sound design possibilities.
This plugin is part of the Sinveibes KorgOSC Collection. The following plugins are also available in the series:
- KorgBent
- KorgTurbo
Features
- Variable-density noise generator with 4 types: white noise, shot noise, velvet noise, semi-periodic noise.
- Feed-forward comb filter with negative or positive feedback, plus additional low-pass damping filter inside the feedback loop.
- Built-in lag filters for ultra-smooth parameter adjustment and modulation.
- Built-in LFO with widely variable frequency (0.1 to 10 Hz).
- Built-in envelope generator with widely variable attack time (1 ms to 10 s).
Package Contents
- Tube plugin in prologue, minilogue xd and NTS-1 formats
- 16 example patches in prologue and minilogue xd formats
- PDF user manual
System Requirements
- Korg Prologue
- Korg Minilogue XD
- Korg NTS-1
Important Note: This product is a plugin for Korg Prologue, Korg Minilogue XD and Korg NTS-1. It is only compatible with these hardware synthesizers.
Note: KorgBent is used as the example.
Before You Start ⚠️
In order for oscillator plugins and supplied presets to function correctly, you must make sure that your Korg synthesizer has the latest available firmware update and that after installing it you also perform the panel update and voice update procedures.
If you install the firmware update but do not complete the panel and the voice updates, this can negatively affect other aspects of your instrument’s operation, not just compatibility with third-party plugins. When you power your Korg on, the main screen will warn you if such additional updates are required. Please refer to your Korg product's user manual for how to check the firmware version installed on your synthesizer - and visit www.korg.com to download the latest version. The download package will also contain the instructions for doing the panel and voice updates.
Plugin Installation
1. Download the .zip file from within your Plugin Boutique User Account > Double-click it to extract the contents.
2. Connect your Korg synthesizer to your computer via MIDI or USB-MIDI and launch the Librarian app.
3. While in the USER OSCILLATORS tab, drag and drop the Bent plugin file into an available slot.
Important Note: For the supplied presets to work, Bent needs to be placed in the #2 user oscillator slot.
4. Press the SEND ALL button in the USER OSC/FX toolbar section.
Patch Installation
1. Connect your Korg synthesizer to your computer via MIDI or USB-MIDI and launch the Librarian app.
2. While in the PROGRAM tab, click to highlight the location into which you want to load the patch.
3. Drag and drop the patch file onto the highlighted location.
4. Press the SEND ALL button in the PROGRAMS toolbar section.
Your Korg Multi Engine Plugin and Patches are now installed and ready to use within your Korg Synthesizer.
