Hardware at Plugin Boutique is currently UK only. Sign up for our newsletter to find out when hardware becomes available in your region.
Notify MeFree gifts available with your purchase
SSL The Bus+
THE BUS+ by Solid State Logic is SSL's attempt at the most versatile version yet of its Bus Compressor, a fixture of SSL console centre sections since the 4000B of 1976. The core design stays faithful to the original circuit and runs on THAT 2181 VCAs; SSL has built on it with colour options, a dynamic EQ and a transient expander. It can be clean and punchy in the 9000 manner, gritty like an early 4000E, or pushed into heavily saturated parallel compression on drums.
Highlights
Innovation
To complement the new feature set, we sought to bring improvements that would benefit recallability and technical performance.
All of the pots on THE BUS+ are stepped and read by a microcontroller which translates the pots position into the required circuit configuration or electrical parameter. This innovative approach not only makes recall significantly easier, it also means THE BUS+ is not subject to pot tolerances – perfect for precision processing applications like mastering.
Dynamic Analogue Equaliser: D-EQ
SuperAnalogue™ technology creates a signal path so transparent and wide bandwidth that nothing is lost, putting the engineer right there in the room with the artist. It's key design elements include a super-wide audio bandwidth, a ruler-flat frequency response, ultra-low transient intermodulation distortion, the absence of electrolytic capacitors in the audio path, extremely low noise and harmonic distortion, and exceptionally low phase shift across the audible spectrum.
The result is unmatched punch, definition, and a larger-than-life sound stage—qualities that define the modern “SSL sound” and are why SuperAnalogue™ consoles remain the professional’s choice for music production.
THE BUS+ Settings
The way engineers and producers use bus compression varies greatly. Some ‘set-and-forget’ and construct a mix into the Bus Compressor, others fine-tune time constants to work with a particular production, often applying it as the final polish to a mix. We caught up with a selection of the world's top producers and engineers to get their feedback on THE BUS+ and see how its legendary glue and punch, in combination with new advanced processing tools, takes their bus processing to the next level.
Features
- SSL Bus Compressor circuit with THAT 2181 VCAs
- Four operating modes: Classic Stereo, Σ S/C Stereo, Dual Mono and Mid-Side
- LOW THD, F/B and 4K MODE compression colours, usable alone or combined
- Adjustable harmonic distortion amount in 4K MODE
- Negative ratios plus new attack and release settings, including Auto 2
- MIX control for parallel compression, and external side-chain inputs and sends
- Unlockable Transient Expander (unlocked by winning the built-in Code-Break Master game)
- D-EQ: two-band parallel analogue dynamic EQ, placed after the compressor by default or before it
- D-EQ bands with 16 frequencies, compress/expand control, 0.5 dB to 15 dB Range and Nominal, FAST or AUTO timing
- Shelf or bell HF band, G-Series LF mode, static band make-up gain, tri-colour activity LEDs and per-band bypass
- Stepped controls read by a microcontroller, for easier recall and freedom from pot tolerances
- +27.5 dBu headroom and selectable operating level
- MDAC make-up gain in 1 dB or 0.5 dB steps, and moving-coil gain reduction meters
- CH 1 IN and CH 2 IN bypass buttons, plus Sleep and Auto-Sleep modes
Compressor
- VCAs: THAT 2181
- Operating modes: Classic Stereo, Σ S/C Stereo, Dual Mono, Mid-Side
- Colour modes: LOW THD, F/B, 4K MODE
- Make-up gain: MDAC-controlled, 1 dB or 0.5 dB steps
- Metering: moving-coil gain reduction meters
D-EQ
- Type: 2-band parallel analogue dynamic EQ
- Frequency points: 16 per band
- Compression/expansion control: 31-position stepped
- Range: 0.5 dB to 15 dB, per band
- Time constants: Nominal, FAST, AUTO
General
- Signal path: 100% analogue, digitally controlled via stepped pots
- Headroom: +27.5 dBu
- Operating level: 0 dB (nominal), +10 dB, -5 dB
- Processing order: Bus Compressor pre D-EQ (default) or post
Physical
- Width: 480 mm / 19 inches
- Height: 88.9 mm / 3.5 inches (2 RU)
- Depth: 303 mm / 11.9 inches (chassis only); 328 mm / 12.9 inches (total including front panel controls)
- Weight: 5.92 kg / 13.1 lbs
- Boxed dimensions: 550mm x 470mm x 225mm (21.7" x 18.5" x 8.9")
- Boxed weight: 8.68 kg / 19.14 lbs
Power
- Power supply: Auto-Ranging 100-240 VAC
- Operating power: 38 Watts
- Sleep power: < 1 Watt
- Auto-Sleep power: 10 Watts
Connectors
- Inputs: Female XLR x2
- External inputs: Female XLR x2
- Outputs: Male XLR x2
- External sends: Male XLR x2
Audio performance: general and Bus Compressor
- Input impedance: 10 kΩ
- Output impedance: 60 Ω
- Maximum input & output level: +27.5 dBu (Operating Level Modes 0 dB/-5 dB, 1% THD)
- Frequency response, bypassed: ±0.025 dB (20 Hz to 20 kHz); < 1 Hz (-3 dB low cut-off); > 200 kHz (-3 dB high cut-off)
- Frequency response, compressor in: ±0.01 dB (20 Hz to 20 kHz); < 2 Hz (-3 dB low cut-off); > 180 kHz (-3 dB high cut-off)
- THD+N, bypassed: -95 dB / 0.0017% typical (1 kHz @ 0 dBu)
- THD+N, compressor in: -88 dB / 0.004% typical (1 kHz @ 0 dBu)
- Noise: -95 dBu typical (Bypassed); -90 dBu typical (Compressor In); -89 dBu typical with 4K Mode In (any intensity)
- Dynamic range: 122.5 dB (Bypassed); 117.5 dB (Compressor In)
- Crosstalk, bypassed: < -118 dB (20 Hz @ +24dBu); < -110 dB (1 kHz @ +24 dBu); < -90 dB (10 kHz @ +24 dBu)
- Make-up gain precision: < 0.003 dB (- 10 dB to + 20 dB)
- Stereo matching: < 0.05 dB (Bypassed); < 0.02 dB (In, 1 kHz @ 0 dBu); < 0.1 dB (Dual Mono, any setting gain reduction <8 dB)
Audio performance: D-EQ
- Frequency response, LF in: ±0.05 dB (20 Hz to 20 kHz); < 2 Hz (-3 dB low cut-off); > 200 kHz (-3 dB high cut-off)
- Frequency response, HF in: ±0.05 dB (20 Hz to 20 kHz); < 2 Hz (-3 dB low cut-off); > 200 kHz (-3 dB high cut-off)
- THD+N: -88 dB / 0.004% typical (LF In, 40 Hz @ 0 dBu); -81 dB / 0.008% typical (HF In, 10 kHz @ 0 dBu, 40 kHz BW)
- Headroom: > 27 dB (LF In, HF In)
- Noise: -90 dBu typical (LF In); -87 dBu typical (HF In)
- LF gain accuracy: ±0.05 dB typical (LF In, 40 Hz @ 0 dBu: -10 dB to +10 dB)
- HF gain accuracy: ±0.05 dB typical (HF In, 10 kHz @ 0 dBu: -10 dB to +10 dB)
- Stereo matching: < 0.05 dB (LF/HF In, 20 Hz to 20 kHz @ 0 dBu); < 0.1 dB (LF In, 40 Hz, any gain change); < 0.1 dB (HF In, 10 kHz, any gain change)
Measurement conditions
- Source impedance of test set: 40 Ω
- Input impedance of test set: 100 kΩ
- Reference frequency: 1 kHz
- Reference level: 0 dBu
- Unweighted measurements: 20 Hz to 20 kHz bandwidth limited, expressed in dBu
- Onset of clipping (headroom): 1% THD
- Tolerance: ±0.5dB or 5% unless otherwise quoted
- THE BUS+
- IEC power cord (UK plug)
- Quickstart guide
- Safety sheet