SampleX V3

Vintage Sampler Emulator

SampleX Version 3 brings you new features like - New LP/ HP Ladder resonant Filters, Stereo Width (Imaging) Control (Mono / M/S expander) & Beatskillz Dynamic Convolution System where we have sampled the real vintage samplers to get their exact sound at various levels.

Standard Variable Sample Rate, Bitrate, and an Aliasing Control (Shift) are also present. Beatskillz has also added IR Machine on/off feature, POP UP value display for the 1/0 section, Filter Section along with 2 New Sampler Models.

Beatskillz went on a quest to study the actual circuitry and found each and every step right from the A/D converters, preamps, analog, and digital filters, and processes involved to recreate each stage and bring you a plugin that can not only emulate a sampler but many, and also lets you design your own sampler or vintage chip!

Controls

A/D Sample Section

Bits Control

Set the bit rate with this control. The Range varies from the modern-day 24 bit right down to 4 bits! You can also Double click the bit display LCD and manually enter the value that you desire.

SR Control (Sample Rate)

Set the sample rate with this control. The range varies from 96 kHz (Your DAW Sample Rate) down to 2khz, You can also Double click the bit display LCD and manually enter the value that you desire.

Aliasing & Drive Section

Shift

The key process of getting those “Aliased/ring” sounds from the vintage samplers was to lower the pitch of the samples. The Effect caused by vintage samplers is emulated here, Allowing a user to “Dial-In” the exact aliasing sound that they want to hear, without actually modifying the pitch of the sample. ” Double Click” and Enter the value or Use the Dial.

Drive (ON / OFF Switch and Control)

In Vintage samplers, users often “Overloaded” the pre-Amp before the A/D Converter to get a “Driven” Sound. We have accurately emulated the sound found in the s900 sampler to give you the same saturation and drive and get even closer to the sounds of those vintage beasts. ” Double Click ” and Enter the value or Use the Dial.

Width Control

Width is a stereo fixed expander and collapser, Go from mono to the original stereo field to m/s expanded space with this control.

Analog Filter Emulation

Filter Type (The Red On / Off Switch)

We have accurately modelled the popular vintage analog mono synth used on countless recordings. This is a 24 DB/OCT Low pass filter with resonance. If you increase the resonance it does FO into ” Self=Oscillation” creating a pitched Tone, Just like the original. This filter is perfect for those warm and dark tones fit for Lo-fi and Hip-Hop music, Extremely addictive.

Filter Freq Control

Set the Cutoff frequency for the low pass filter here. The range is 20 KWZ to 20 HZ.

RES Control

Set the resonance of the low pass filter using the slider control. The Range is 0 to 1.0, You can go extreme and get the filter into self-oscillation mode like the real analog filter that it was modelled after.

Mix & Input - Output Section

Wet / Dry

The Wet Control will control the amount of the “Effected” signal and the Dry Control will mix in the Original/Clean signal. This gives you the possibility of mixing just the right amount of processing to your input audio.

In / Out

The In Control lets the user increase or decrease the gain of the input audio and the out control lets the user increase and decrease and the gain on the output audio signal, after being processed by the plugin.

Features

• 6 Iconic Vintage Samplers
• New Multi Convolution System
• New HP / LP Resonant Ladder Filters
• Width Control Stereo Expansion to Mono
• New Presets and GUI
• IR Machine on/off feature
• Popup value display for the 1/0 section and the Filter Section

System Requirements

Mac

• macOS 10.14 Mojave or later (macOS 10.15 Catalina & macOS 11 Big Sur Supported) (64-bit only)
• VST3 / AU / AAX Format
• Intel i5 or later / AMD Athlon 64 or equivalent
• Screen Resolution: 1024×768
• 2 GB RAM
• 300 MB HD Space

Windows

• Windows 10 or later (64-bit only)
• VST3 / AAX Format
• Intel i5 or later / AMD Athlon 64 or equivalent
• Screen Resolution: 1024×768
• 2 GB RAM
• 300 MB HD Space