Buy PSP Impressor, get a free gift with purchase:
Put Some Pressure On The Mix
The PSP Impressor is an incredibly accurate, a fully-featured, high-precision compressor designed to process whole mixes, busses or single tracks. PSP Impressor emulates the magical classic characteristics of compressors with valve and opto-electronic circuits as well as classic modern compressors. PSP Impressor also features a highly configurable side-chain. The side-chain filter has a significant effect on PSP Impressor’s sound and operation. Depending on your side-chain filter settings, the filter also lets you use the compressor as a de-esser or to reduce the pumping effects of heavy kick drums and the like.
PSP Impressor also works very well in combination with the PSP Saturator. With the PSP Impressor before the PSP Saturator in the signal path (think of it like placing a bus compressor before a tape machine), you can employ both plug-ins simultaneously (using subtle settings!) in order to impart a very cohesive sound, like your mix was being produced on expensive analog hardware. Of course, you can also reverse the order, placing PSP Saturator before PSP Impressor - never be afraid to experiment!
Features
- A wide range of soft knee characteristics
- Peak or RMS level detection
- External or internal side chain signal with a smooth bell-type filter
- An output algorithm which can operate as either a brick wall limiter or soft saturation algorithm to preserve peaks above 0dBFS
System Requirements
PC
- Windows 7 – Windows 11
- VST, VST 3 and AAX
- The latest iLok License Manager application installed
Mac
- macOS 10.12 – macOS 13 Ventura (Apple Silicon Supported)
- VST, VST 3, AAX and AU
- The latest iLok License Manager application installed
Please Note: PSP VintageWarmer2 is used as an example.
Activation
1. Visit the PSP Registration Centre and create/log into your PSPaudioware account.
2. Select the Manual Product Activation link and copy and paste/manually enter the serial number that is provided with your User Account. > click 'Activate!.'
3. Your PSP product will now show up in your PSP customer account. Your 30-digit iLok activation code will also be listed under authorization (PACE). Download the relevant installer.
iLok Registration
1. Go to the iLok website and create a new account if you are not currently registered and do not have the iLok Licence Manager installed on your computer.
2. Download and install the iLok License Manager.
3. Open your iLok license manager application > click 'Sign In'.
4. Enter your iLok registered User ID and password > click ‘Sign In'.
5. Once you are signed in, click the ‘Redeem’ icon which is located at the top-right corner of the iLok Licence Manager’s interface.
6. Copy and paste/manually enter the 30-digit code from your PSP Audioware account into the available Activation Code boxes, and then click ‘Next'.
7. Select your activation destination > Click 'Activate'.
8. Click 'Ok'.
Installation
Mac
1. Open the recently downloaded .dmg file to begin the installation.
2. Click 'Continue'.
3. Click 'Continue'.
4. Click 'Continue'.
5. Click 'Agree'.
6. Click 'Continue'.
7. Click 'Install'.
8. Click 'Close'.
9. Open your DAW > Open your newly installed software.
Your software is now activated and ready to use.
PC
1. Open the recently downloaded .exe file to begin the installation.
2. Click 'Next >'.
3. Select 'I Accept the Agreement' > Click 'Next'.
4. Click 'Next >'.
5. Click 'Next'.
6. Click 'Next'.
7. Click 'Next' to begin the installation.
8. Click 'Finish'.
9. Open your DAW > Open your newly installed software.
Your software is now activated and ready to use.
