Hardware at Plugin Boutique is currently UK only. Sign up for our newsletter to find out when hardware becomes available in your region.
Notify MeFree gifts available with your purchase
Fusion
Fusion by Solid State Logic is an all-analogue, 2U stereo processor built for today's hybrid studios, with the job of adding tonal character, weight and space to a mix bus or stereo stems. Its colour processors are all-new SSL analogue designs, and SSL pitches the unit as a partner for its Stereo Bus Compressor.
Vintage Drive uses interacting Drive and Density controls to overload an analogue stage, producing harmonic saturation and soft compression that range from gentle thickening to heavier distortion. Violet EQ is a minimum-phase-shift, two-band shelving EQ with four switched frequencies per band and ±9 dB, intended for adding bass weight and top-end shine in a few moves. The HF Compressor acts only on the top of the spectrum, smoothing harsh or brittle detail with a gentle, tape-like softening of the highs. Stereo Image is an analogue Mid-Side stage that works on the Side component to widen or reshape the stereo field, and the switchable custom SSL transformer adds low-end saturation and a high-frequency phase shift for a fuller bottom and extra sparkle.
Every unit also carries a concealed sixth processor. Hold the HF Compressor's 'in' button for five seconds and the section turns into a full-band version of SSL's Listen Mic Compressor, with the X-Over control taking on a new job as a wet/dry blend for parallel compression.
Workflow details include ±12 dB input and output trims, an input overload LED, large peak-hold meters and a third-order high-pass filter at the input with three cut-off choices, plus three-colour indicators showing the state of Vintage Drive and the HF Comp/LMC. An XLR insert loop works either as a stereo insert, which can be placed ahead of the Violet EQ, or as a Mid-Side loop that lets outboard compressors or EQ treat the centre and sides separately, with the option to place it ahead of Stereo Image. Main inputs and outputs are also on XLR.
Features
- All-analogue 2U stereo processor for the mix bus and stereo stems
- Vintage Drive: interacting Drive and Density controls for saturation and soft compression
- Violet EQ: two-band, minimum phase-shift shelving EQ with four frequencies per band and ±9 dB
- HF Compressor for high-frequency-only smoothing of harshness
- Hidden full-band Listen Mic Compressor mode with wet/dry mix (hold the HF Comp 'in' button for five seconds)
- Stereo Image: analogue Mid-Side width processing
- Switchable custom SSL transformer for low-end saturation and high-end phase shift
- ±12 dB input and output trims, input overload LED and large peak-hold metering
- Third-order input high-pass filter with three selectable cut-off frequencies
- Tri-colour status indicators for Vintage Drive and HF Comp/LMC
- XLR insert switchable between stereo and Mid-Side operation, with selectable insert position
- XLR inputs and outputs
Format
- Size: 2U
- Channels: stereo
- Signal path: all-analogue
Physical
- Width: 480mm / 19 inches
- Height: 88.9mm / 3.5inches (2 RU)
- Depth: 303mm / 11.9 inches (chassis only); 328mm / 12.9 inches (total including front panel controls)
- Unboxed weight: 5.86kg / 12.9lbs
- Boxed size: 550mm x 470mm x 225mm (21.7" x 18.5" x 8.9")
- Boxed weight: 9.6kg / 21.2lbs
- Note: All physical specification values are approximate.
Power
- Power: 50 Watts maximum, 40 Watts typical
Processing
- Colour processors: Vintage Drive, Violet EQ, HF Compressor, Listen Mic Compressor (hidden mode), Stereo Image, Transformer
- Violet EQ: two-band shelving, four switched frequency points per band, +/-9dB
- High-pass filter: 3rd order, three selectable cut off frequencies
Level controls
- Input trim: +/-12dB
- Output trim: +/-12dB
- Metering: large peak-hold, plus input overload LED
Connections
- Inputs and outputs: XLR
- Insert: XLR, switchable Stereo Insert or Mid-Side
Audio performance
- Input impedance: 10kΩ
- Output impedance: 75Ω
- Max input level: 27.25 dBu (1% THD)
- Max output level: 27.25 dBu (1% THD)
- Frequency response (all circuits off): ±0.05dB, 20Hz to 20kHz; -3dB low rolloff < 5Hz; -3dB high rolloff > 180kHz
- THD+Noise, all circuits off: < 0.005%, 0.0025% typical; conditions: +20dBu, 1kHz (filter 22Hz to 22kHz)
- THD+Noise, bypass: 0.0005% typical; conditions: +20dBu, 1kHz (filter 22Hz to 22kHz)
- THD+Noise, Vintage Drive: Indicator Off < 0.2% typical; Indicator Green 0.2% to 0.5% typical; Indicator Orange 0.5% to 2% typical; Indicator Red > 2% typical
- CMRR: > 78dB, 85dB typical (20Hz); > 78dB, 88dB typical (1kHz)
- Noise, all circuits off: < -86dBu, -91dBu typical
- Noise, bypass: -94dBu typical
- Noise, Vintage Drive (mid Drive, mid Density): -75dBu typical
- Noise analyser filters/BW: 22Hz to 20kHz (AES17)
Measurement conditions
- Source impedance of test set: 50Ω
- Input impedance of test set: 100kΩ
- Reference frequency: 1kHz
- Reference level: 0dBu
- Unweighted measurements: 22Hz to 22kHz band limited RMS, expressed in dBu
- Onset of clipping (headroom): 1% THD
- Tolerance: ±0.5dB or 5% unless otherwise quoted
- Fusion
- IEC power cord (UK plug)
- Quickstart guide
- Safety sheet
- Registration card