Buy RAW-Kick, get a free gift with purchase:
RAW-Kick is a product developed in conjunction with DJ Free-K and DJ Promo. Based on the legendary RAW synthesizer, RAW-Kick includes neat features and focus specifically designed for today’s demanding producers!
RAW-Kick offers three individual layers to design and build up your Kick drum sound, which is a common method often used by producers. But now, instead of using three separate products, you can use this method within one product. Each layer offers two modes. You can select a dedicated kick synthesizer model or use a sample-based layer. The ‘Kick Model’ type offers some new and unique features, for instance, the RAW amount. You can also control the harmonics which can have a firm impact on the sound, especially in combination with the many included distortion FX on board.
The ‘Sample’ type also has to offer some neat features like a multi-mode analogue modelled filter, two EQ sections and many FX algorithms with several types of distortion and other top-quality FX.
The Master section of RAW-Kick finishes it all off with an additional double EQ section and the MONO/STEREO FX to make your kick tight in its low end and wide in the mid/high range of the spectrum!
The Master section also offers you some neat control over all three layers at once, for speeding up your workflow creating the perfect RAW-Kick!
Industrial Strength Samples have created an Expansion for Raw-Kick which can be found on Loopmasters.
Now NKS Compatible!
System Requirements
PC
- Windows 7/ Windows 8/ Windows 10 (32 & 64 bits)
Formats:
- VST
- AAX (Note: PC AAX for PT 12 or higher)
- Compatible with NI NKS system
Mac
- OS-X 10.9 - 10.15 (64 bits only)
Formats:
- AU
- VST
- AAX
- Compatible with NI NKS system
Notes:
- Serial/licence system with activation whilst registering the product
- 2nd serial for a secondary computer/laptop is available after you have registered the product’s original serial/license.
(SubBoomBass is used as the example).
Mac
1. Visit Rob Papen and create an account by selecting 'Create Account'.
Note: If you already have an account set up with Ron Papen, 'Login' to your account and skip to step 4. of the installation process.
2. Enter your personal details, and once completed check the tick box that reads 'Yes, I agree to Privacy Policy Rob Papen' before clicking 'Send Registration'.
3. The registration of your account has successfully been completed > select 'click here to login' to access your account area.
4. Select the 'My Products' tab, which is located at the top-left corner of your account area.
5. Click the 'Register New' option.
6. Select the product that you have purchased, as well as the most recent version number (which in this instance is 'Online'), before manually entering/copying and pasting the 32-digit Serial Number that is provided within your User Account > once completed, click the 'Save' tab to register your software.
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, refresh the web page and manually enter the digits (including the '-' hyphens) before re-clicking the 'Save' option.
7. The registration of your software has successfully completed > select the 'Download latest version: SubBoomBass' hyperlink to navigate to the software download area.
8. Select the relevant format installer download (s) in accordance with your DAW's compability specifications, to inititiate the downloading of your purchased software.
Note: The product user manual is also obtainable from this location.
9. Once the software installer file has finished downloading, click the file entitled 'SubBoomBass_Installer.dmg' to launch the application installer application.
10. Double-click the 'SubBoomBass_Installer.pkg' application icon begin the installation process.
11. Click 'Continue' to verify the installation, if prompted to do so.
12. Click 'Continue' once again.
13. Read through the Licence Agreement > click 'Continue' then 'Agree'.
14. Manually enter/copy and paste the original 32-digit Serial Number that you were provided with, before clicking 'Continue' (the Serial Number is located in both your Plugin Boutique and Rob Papen User Accounts).
Note: Ensure that you select the correct 'Product' and 'Type', as well as checkingt that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, manually enter the digits (including the '-' hyphens) before re-clicking the 'Continue' option.
15. Review the installation before clicking 'Install', and then 'Continue Installation'.
16. The installation of your software has successfully completed > click 'Restart' to reboot your computer.
Note: Ensure that you have saved any important work that may be open within the applications you currently have open, before selecting the 'Restart' option.
17. After your computer has successfully restarted, open your DAW and locate/open your newly installed/activated software VST.
Note: If the software fails to appear, rescan your DAW's Plug-in selection.
The Software is now Activated and Ready for Use Within Your DAW!
Windows
1. Visit Rob Papen and create an account by selecting 'Create Account'.
Note: If you already have an account set up with Ron Papen, 'Login' to your account and skip to step 4. of the installation process.
2. Enter your personal details, and once completed check the tick box that reads 'Yes, I agree to Privacy Policy Rob Papen' before clicking 'Send Registration'.
3. The registration of your account has successfully been completed > select 'click here to login' to access your account area.
4. Select the 'My Products' tab, which is located at the top-left corner of your account area.
5. Click the 'Register New' option.
6. Select the product that you have purchased, as well as the most recent version number (which in this instance is 'Online'), before manually entering/copying and pasting the 32-digit Serial Number that is provided within your User Account > once completed, click the 'Save' tab to register your software.
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, refresh the web page and manually enter the digits (including the '-' hyphens) before re-clicking the 'Save' option.
7. The registration of your software has successfully completed > select the 'Download latest version: SubBoomBass' hyperlink to navigate to the software download area.
8. Select the relevant format installer download (s) in accordance with your DAW's compability specifications, to inititiate the downloading of your purchased software.
Note: The product user manual is also obtainable from this location.
9. After the software installer file has finished downloading, double-click the file entitled 'SubBoomBass_Installer' .zip folder to extract the .exe installer file.
10. Once extracted, double-click the .exe installer file to begin the installation process > click 'Next'.
11. Read through the Licence Agreement and select 'I accept the agreement' > click 'Next'.
12. Type in your preferred User Name, Organization and manually enter/copy and paste the original Serial Number that you were provided with, before clicking 'Continue' (the Serial Number is located in both your Plugin Boutique and Rob Papen User Accounts).
Note: Ensure that you select the correct 'Product' and 'Type', as well as checking that there are no spaces/mistakes when entering your Serial Number > if you receive a code error message of any kind, manually enter the digits (including the '-' hyphens) before re-clicking the 'Next' option.
13. Select a computer VST Plug-ins folder destination in which to install/save your software to > click 'Next'.
14. Select a computer Library location in which to install/save your software to > click 'Next'.
15. Select the software format (s) that you wish to install > click 'Next'.
16. Select a Start Menu Folder to create a shortcut to your new software installation > click 'Next'.
17. Review the installation and click 'Install'.
18. The installation of your software has successfully completed > click 'Finish'.
19. After your computer has successfully restarted, open your DAW and locate/open your newly installed/activated software VST.
Note: If the software fails to appear, rescan your DAW's Plug-in selection.
The Software is now Activated and Ready for Use Within Your DAW!
